Announcement

Collapse
No announcement yet.

How to create a free dust/spray?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to create a free dust/spray?

    Dear all,
    Im newbie here and i need you to help me to create a free dust like spraying a dust area in to papper.

    I try some tools PhotoShop or FreeHand, Illutrator, but it is hard to create, i used to use brush and many patterns of brush but it seems the dust is covered not so freely and naturally.

    I created and example,but it is not success as expected much: http://www.nabble.com/file/8286/freedust.jpg

    I think this kind of creation is need scripting or another method.
    So if there is anyone have or used to get same situation, pls give me an advice!

    Thanks and surely give u coffy and cake!

    KoolJ.
    www.kooljstudio.com

  • #2
    Create a new layer, fill it black and then do filter -> noise -> add noise. Set the layer's blend mode to screen.

    That will give you white dust. To get black dust, invert the above, and set the blend mode to screen)

    If you don't want the dust to cover the whole image, add a layer mask. Fill the layer mask black, and then paint white or gray onto the layer mask where you want the dust to show.

    Comment


    • #3
      Originally posted by hewligan
      Create a new layer, fill it black and then do filter -> noise -> add noise. Set the layer's blend mode to screen.

      That will give you white dust. To get black dust, invert the above, and set the blend mode to screen)

      If you don't want the dust to cover the whole image, add a layer mask. Fill the layer mask black, and then paint white or gray onto the layer mask where you want the dust to show.
      Dear u,
      thanks 4 your sudden comment, i tried both ways, but it seems not lik i expected. Or something i went wrong? Does it like this:http://www.nabble.com/file/8287/freedust2.jpg

      Or can you give me some examples that you did from that method?

      Thanks 4 your comment!
      Kj.
      Last edited by koolj; 05-09-2007, 11:56 PM.

      Comment


      • #4
        Tick the monochromatic box in the add noise filter, and you probably want to lower the value for amount, too.

        Comment


        • #5
          you could also work in grayscale. Go in filter- render clouds. Then convert to bitmap with diffusion dither- instant dust-
          I don't make mistakes. I thought I did once but I was wrong.

          www.deepanchorgraphics.com

          Comment


          • #6
            oh sorry- I think I replicated your sample. . .
            I don't make mistakes. I thought I did once but I was wrong.

            www.deepanchorgraphics.com

            Comment


            • #7
              Here are some more example, i would like to create something like it is gushes paint out, the dust is multi sized and sprayed area is various:
              http://www.nabble.com/file/8384/2.jpg
              http://www.nabble.com/file/8385/1.jpg
              http://www.nabble.com/file/8386/3.jpg

              KJ.

              Comment


              • #8
                The first one just looks like it was done with difference clouds.

                The second one looks like an outer glow that's been set to dissolve mode rather than screen.

                The third one looks like it was drawn. By varying your brush settings inphotoshop, you could produce that pretty quickly.

                Comment


                • #9
                  Alternatively:

                  Get out your water colours, water and an old tooth brush or fine bristled brush... Good old kindergarten arts and crafts.

                  Scan the result as a 1200dpi bit map and apply.
                  Purity and simplicity... and ubuntu.

                  If you are neutral in situations of injustice, you have chosen the side of the oppressor. If an elephant has its foot on the tail of a mouse and you say that you are neutral, the mouse will not appreciate your neutrality.
                  - Bishop Desmond Tutu

                  Comment


                  • #10
                    Originally posted by Samakimoto Graphics
                    Alternatively:

                    Get out your water colours, water and an old tooth brush or fine bristled brush... Good old kindergarten arts and crafts.

                    Scan the result as a 1200dpi bit map and apply.
                    Or you could use an airbrush or aerosol can to spray the "dust" on a paper. Scan it, and if needed vectorize by tracing it in Illustrator.

                    Comment


                    • #11
                      Fredrich has maybe the best way.
                      USe a real world piece and scan it and Auto Trace if needed. Then overlap and set to different Transparency Modes to create neato-speedo effects.
                      Dribbble Page
                      Behance Portfolio
                      Linkedin Profile

                      Comment


                      • #12
                        Well, i got it, i can make it by using some free brushes from GoMedia.com or photoshopbrushes.com.

                        It works, evryone see: http://www.nabble.com/file/p10714847/gotit_.jpg

                        KJ.

                        Comment

                        Search

                        Collapse

                        Sponsor

                        Collapse

                        Incredible Stock

                        Latest Topics

                        Collapse

                        • nikko
                          Reply to What font, similar?
                          nikko
                          nvm found it
                          it's handel gothic
                          Today, 01:16 PM
                        • HotButton
                          Reply to Logo Design Does Not Meet Standards
                          HotButton
                          Well, for one thing, the colors will have to be different, but even if you had posted this in all-black, I'd have said this:

                          When a logo is text only, (which this is, for all intents and...
                          Today, 12:47 PM
                        • KitchWitch
                          Reply to Logo Design Does Not Meet Standards
                          KitchWitch
                          Hi Jishan and welcome to GDF.

                          We ask all new members to read very important links here and here. These explain the rules, how the forum runs and a few inside jokes. No, you haven't done...
                          Today, 12:32 PM
                        • Jishan
                          Logo Design Does Not Meet Standards
                          Jishan
                          So I recently started working for a company and due to emergency situations, I had to cookup a company logo from a jpeg file the company had. What I made and the company had are pretty similar and presented...
                          Today, 12:23 PM
                        • HotButton
                          Reply to 'Test Zone' Idea/examples
                          HotButton
                          Yeah, you really haven't given us a fair shot at helping you. Could use a lot more context.
                          Today, 11:56 AM
                        GDF A division of Mediabistro Holdings Adweek | Mediabistro | Clio | Film Expo Group Contact Us | Terms of Use | Privacy Policy Copyright 2016 Mediabistro Holdings
                        Working...
                        X