Resolution is only one problem you’re facing. The other problem is that your image’s proportions aren’t the same as those of an A4 sheet of paper, so you’d need to stretch and distort the image to fit.
There is no program that can perform the impossible.
There is. It’s called Easy Button. I don’t have it though.
Seems so.I thought Topaz Gigapixel can enlarge photos as advertized.
One of the reasons this has been confusing is because of how you’re mixing terms.
1754 x 1240 are the dimensions. Some would say “pixel dimensions”. That’s because, with pixels as the unit of measure, the dimensions of the image are literally 1754 pixels x 1240 pixels.
Mathe-mechanically, the concept of “pixel dimensions” is unresolved because the pixel is not a constant, and is therefore not a reliable unit of measure. Pixels come in different sizes, and a greater or lesser number of pixels can occupy the same area. That’s the reason that, in addition to dimensions, an image is defined by resolution. Resolution dictates the size at which the image resolves.
To demonstrate that simply, consider the image of 1754 pixels x 1240 pixels at a resolution of 1 pixel per inch (1 ppi). Its dimensions at that resolution would be 1754 inches x 1240 inches.
Now double the resolution to 2 ppi and the dimensions become 877 inches by 620 inches.
So you see dimensions and resolution have an inverse relationship.
The other issue, it seems, is aspect ratio. A rectangle’s aspect ratio is the relationship between its height and its width. An A4 sheet of paper has an aspect ratio of 1 : 1.414. That is, its longer side is 1.414 times the length of its shorter side. If the objective is to fit an image to an A4 sheet, the image must be of the same aspect ratio. If the image is not the same aspect ratio, there are 2 scaling options:
there is a genie lamp floating in the hudson river i can fed-ex to who ever needs to re-crop the image size
It would be easier to just cut the darn paper to fit the graphic.
Oh, dang, that was funny.
OK,then.
I could cut down the paper top edge or bottom edge…
Just tell me what resolution should I make when transforming image so I can cut down the paper.
This is too funny.
There is this company that started making 3-d printers just for this task, these printers are made-to-order for any size, resolution and paper type the buyer wishes. the company “BakedMoon” operates out of Utopia, Kansas and has started producing customs printers on April 31, 2020.
I wish i could ad a link but my internet is not working for me today.
Thank you PrintDriver. You just saved the day.
pass:photoshopCC2020
Guys what am I doing wrong? 
You’re not doing anything wrong – other than trying way too hard to get the proverbial round peg to fit into a square hole. The aspect ratio of the file you’re trying to fit does not match the aspect ratio of the page. There is going to be a white area on the top, bottom or both when you print this. Seriously, I think you are way overthinking this.
oh okay…then I guess will print it as it is…
Thank you guys very much.
This is just the sort of basic problem I have.
Your image is wider than it is tall - that’s what ‘aspect ratio’ is. A4 is taller than it is wide (providing it’s portrait format, not landscape). So if you print it in portrait format you’re always going to have spare paper.
I approach this by thinking - anything I’m printing only needs to be at 300 dots per inch. How wide is the page? A4 is 8.3 inches wide (portrait). The image only needs to be 300 x 8.3 = 2,490 dots wide. For dots read pixels. Sounds as though you can easily resize your image down to 2,490. Anything bigger is a waste of space on the hard drive.
Print it out and, as I say, you’ll have space spare but it will fill the width. You just have to accept that not all images are the same aspect ratio as A4 (1.41) so you’ll always have spare paper.
Everyone else will now correct me!
David
I think I can use 2 images and stick it one below other then use free transform tool in Photoshop to fit them on A4 paper using free transform and move tool.
What do you think about that?
Guys,please help,what am I doing wrong and why is this message displaying?
I moved each of the images below the edges of the A4 paper (white background dimensions) I created but I get this annoying message each time I select print command:
“The Image is larger than the Printable Area: some clipping will occur”
Your printer does not print up to the edge of the paper, there are margins where the print head does not reach. If your image goes into these margins it will be ‘clipped’. The margin is commonly 4-5mm so make sure you leave at least that amount clear at the edges of the paper.
Seriously?
